Wheels

With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Deep section Road racing, Triathlon, Commuting, Touring, Track racing, and Singlespeed rim for strength and aerodynamics - Hollow core aluminum with machined sidewalls for improved braking

• Aluminum hubs • Sealed bearings • Quick release • 8-speed cassette • 36-hole • 135mm rear spacing • Black or silver

- End cap for Origin8 MT-3200 hubs - Spacing / Axle: 148mm

- End caps for Origin8 FB-1100 fat bike hubs

- Centerlock, 11- speed compatible road hubs - Sealed bearings keep out contamination and dirt while providing a smooth rotation - Skewer included - Spacing / Axle: QR - OLD: 100mm

- Forged aluminum construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc rotor compatible - 8/10-speed cassette compatibility - Quick-release - 135mm hub spacing

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Light weight hub body and disc brake rotor mount. King in-house made bearings use surgical steel races machined at the same time to ensure a perfectly matched inner and outer race. - Easily serviceable and completely re-buildable - 5-Year warranty - Hub Drilling: 32 - Hub/Brake Compatibility: Center-Lock Disc - Color: Black - Spoke Interface: J-Bend - Front Axle: 12mm Thru x 100mm

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Valve: Schrader - Tire Type: Clincher

- Axle adapters for CX/GX/MT/FB-1110 Elite Series front hubs - Available in standard QR, 12mm, 15mm, and 20mm thru-axle options - Material: Aly - Color: Blk

- 6 pawl/48 point/7.5° engagement - Cassette bodies for Elite Series RD-1110 hubs - Sealed bearings - Supplier Part: RD-1110 - Use: XDR - Material: AL7075 - Bearing Type: Sealed - Compatibility: RD1110

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Lighter format / all mountain / trail riding The PHASE30 mirrors Chromag's BA30 profile but in a lighter format that suits all-mountain and trail riding conditions. This is a high-quality alloy rim that is tougher than most with added protection at the bead-walls for impact resistance and reduced sidewall cuts. The nipple/spoke bed is oriented to the spoke direction to reduce weakness caused by bend in the spoke at the nipple hole. The PHASE30 is made with premium alloy, extruded and carefully formed for consistent shape. It is then fusion welded and ground for a strong precise finish. Chromag's fusion welding system leaves a perfect seamless joint that becomes the strongest section of the rim ensuring that your rim won’t split at the seam if you have an impact there. - Premium extruded alloy - Fusion welded seam-ground finish - Internal bracing profile - Impact resistant design - Tubeless Ready - 29" ERD: 604mm - Tire sold separately

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front

Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers Hubs - Shimano HG/Synthesis Base Steel Driver

The Box One Rims feature a double-walled, eyeleted, low profile designed and optimized to be lightweight and durable! Offered in both brake and brake-less variants, allows for clean and sleek wheel builds that only have rim brake tracks where they need to be. FEATURES - Low Profile Design - Optimized Internal Geometry - Machined Brake Track IMPORTANT NOTES Brake-Less variants do not have a brake track and are not designed to be used with rim brakes! These variants can be used as front rims or rear rims with a disc brake ONLY! COMPATIBILITY - Box One X2 Pro Carbon 1 1/8" cro-mo steerer 20" X 20mm fork - Box One Quantum Hubset 36h - Box Two 20mm Front Hub 36h - Box Two 20mm Freewheel Hubset 36h - Box Three Pro 10mm Rear Disc Hub 36h

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side. Constructed from 7075 Aluminium and made to the manufacturer’s exact specifications.

Easton Tubeless Kits are designed to work with our tubeless ready Arc rims and Heist wheels, allowing you to enjoy the full benefits of a tubeless setup: less flats and a reduction in weight. Each kit comes with two removable core valves with removal tools, and enough tubeless tape for two 29-inch wheels. Easton tubeless valves have been designed for optimal seal with the shape of Easton rims and a have removable valve core for easy sealant application. Easton tubeless tape comes in various widths to match the internal width of your rims for a better seal and improved fit between rim and tire. Tape weighs 9-grams per wheel. Valves weigh 6.4-grams each.

Control and stability for enduro riding. - Rims sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.

• Size: 26 x 4.0 • ISO: 559 • Double Wall Construction • Non-machined Side Wall • Color: Black • Drill: 36 • Weight: 1,579 grams • Width: 100mm • Rim depth: 29.5mm

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm

- Axle/Spacing: 9 x 100mm nutted - Hole: 32-hole - Weight: 252g - CNC machined, high-polished, high-flange aluminum shell - Japanese sealed cartridge bearings - Hollow CrMo nutted axle with titanium color finish

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.