Cables

- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- 1700mm length

- Basic housing and galvanized inner cable with header card
- Brake kit includes black casing and a 1.6mm cable
- Derailleur kit includes black casing and a 1.2mm cable
- Cables have dual ends with leads to fit any brake or shifter

- Basic housing and galvanized inner cable with header card
- Derailleur kit includes black casing and a 1.2mm cable
- Cables have dual ends with leads to fit any brake or shifter
- Cable diameter: 1.2mm
- Casing diameter: 5mm

- Pre-stretched, stainless 19 strand inner wire
- Slick profile for smooth performance
- Cable only, housing sold separately

- Pre-stretched, stainless 19-strand inner wire
- Slick profile for smooth performance
- 2000mm length
- Use: brake
- Length: 2000mm
- Diameter: 1.6mm
- Front/rear set

- Cable and housing set with special ferrules and end caps
- Anti-compression housing reinforced with Kevlar and super slick inner sleeve
- Prestretched stainless steel inner cable with slick outer profile
- Rubber donut frame protectors included
- SRAM and Shimano compatible

- Cable and housing set with special ferrules and end caps
- Anti-compression housing reinforced with Kevlar and super slick inner sleeve
- Pre-stretched stainless steel inner cable with slick outer profile
- Rubber donut frame protectors included
- SRAM and Shimano compatible
- Cable diameter: 1.5mm
- Casing diameter: 5mm

Our Box One Inner Shift Cable is the perfect upgrade for your Box Three or Box Four cable. It is also an ideal replacement for your Box One or Box Two cable set-up. When combined with our Box One housing it has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time.
FEATURES
- Our Best Performing Cable
- Slick Coated
- Inner Cable 2100mm
- (2) 1.8mm Cable End Crimps
COMPATIBILITY
- Works with 11, 9, 7, 8, 12, and 10 speeds
- Weight: 14.6 grams

Want the best combination of braking power and cable strength? Box Two Linear Brake Cable Kits start with custom housing that includes stainless steel mesh-wrapped linear wires for The inner cable wires are stainless steel, so they won’t rust over time. Each cable kit includes 63 inches of Linear housing, a BMX-race specific stainless steel cable wire, two black brass ferrules, and two black alloy cable end caps.
FEATURES
- 63 inches of Linear housing
- BMX-race specific stainless steel cable wire
- Two black brass ferrules
- Two black alloy cable end caps
- Stainless steel cable wires
SPECIFICATIONS
- Weight: 24 grams / 0.84 ounces

Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag.
Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps.
Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.

Our Box One Shift Cable & Housing Kit is the easiest way to get silky smooth and consistent shifts on any drivetrain. Replace your Box One, Box Two, Shimano and SRAM kit, or upgrade your Box Three or Box Four set-up. This kit is a combination of our best performing Cable Housing and Slick Coated Stainless Steel inner cable. In lab tests this combination has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time.
FEATURES
- Our Best Performing Cable
- Inner Cable 2100mm
- Our Best Performing Housing
- 4mm Housing 2000mm
- Prepared with silicone grease
- (2) 1.8mm Cable End Crimps
- (3) 4mm Sealed Short Ferrules
COMPATIBILITY
- Works with 12, 11, 10, 9, and 8 speeds.
- Weight: 84.3 grams

- BMX brake cable kits for front or rear application
- 1.5mm galvanized inner slick cable
- Cable length: 1700mm / 67-inches
- Housing length: 1750mm / 69-inches

- Teflon-coated stainless steel inner wire
- Includes cable, housing, ferrules, and cable tips
- Cable length: 2100mm
- Housing length: 1800mm
- Use: Front or Rear
- Length: 2100mm
- Diameter: 1.5mm
- Style: BMX/MTB

- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Dual Cable
- Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Fits most
- Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 7.5 – 9.5-inch
- Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 11 - 12.5"
- Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: X-Long
- Diameter: 1.5mm

Hose fittings for Hayes hydraulic disc brakes available a la carte.
Hayes brake compatibility:
- HFX-9
- Prime
- Sole
- El Camino
- Radar

K2 Hydraulic Hose Kit for Dominion Prime Stroker and El Camino
Hayes proprietary hose kit is reinforced with Kevlar for strength and durability. Kit includes: 200cm rear hose and all fittings.

- Simple solution for frames that do not have housing stops
- CNC aluminum with two housing stops per guide

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
Page 1 of 8
Next page