Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Protective/Armor

Strider Knee And Elbow Pad Set
Protect your little rider with Strider's Knee And Elbow Pad Set. These tough pads boast premium hard plastic outer shells and Velcro straps to keep them securely in place.
POC Joint VPD Air Knee
Sometimes you want coverage, but you don't full full-on DH pads. POC's Joint VPD Air Knee pads are perfect for rowdy trails where you're pedaling most of the way. The pads use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. They're breathable, stay where they're supposed to and are so light, you don't know they're there. Until you need them.
POC Joint VPD 2.0 Knee
POC's Joint VPD 2.0 Knee pads offer serious protection that is just shy of full-on DH pads. They use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong, even in the event of a tumbling crash.
Race Face Ambush Knee Guards
Features D3O high performance foam and an open-back construction so no shoe removal is necessary. • D3O high performance shock absorbing foam on the front and foam padded sidewalls for additional coverage • Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort • Integrated stabilization pad centers the knee and ensures a secure fit • Branded rubber grab tabs and RF moniker logo • Open back construction; no shoe removal necessary
Fox Racing Launch Knee/Shin Pads
The Launch pads from Fox are high-tech leg armor for mountain bikers that protect you like no other. With Fox's X-Up strapping system, the knee cap locks onto both sides of your knee to prevent twisting and slipping. The ribbed hard-shell plates are asymmetrical for comfort and provide superior impact protection. Plus, they're even vented to breathe well, so you can wear them on every ride.
Race Face Charge Sub-Zero Leg
- Stretch thermal brushed back fleece for comfortable weather protection - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures stay-put fit - Silicone patch at shin eliminates slippage - Extra length for cold-weather coverage - This pad is NOT rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only
Race Face Dig Elbow
Comfortable elbow pads that stay put throughout the ride. Hard shell performance, soft shell look and feel. - Hard shell performance, soft shell look and feel - Perforated neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Soft mesh panel at inner elbow to keep cool - Integrated stabilization pad centers the elbow and ensures 'stay-put' fit - Woven upper elastic strap and lower Neoprene comfort strap - Branded rubber grab tab
7iDP Flex Knee Armor
- Double layer custom foam for increased airflow and reduced weight - Upper calf muscle support to prevent pad from slipping - Center adjustment strap provides even tension above calf muscle and around top of pad - Custom idp polygon neoprene for superior protection and ventilation - Designed beyond CE EN 1621/1 Standards
7iDP Transition Knee Armor
- Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards
Leatt 3DF Airflex Knee Guard
- Super slim 6mm CE impact certified - Armourgel ultra slim impact absorbing gel - MoistureCool wicking fabric - Silicone lamination to keep protector in place - Great fit and very comfortable by 3D design, weighs only 105g each - CE certified for impact protection EN1621-1
Lizard Skins Soft Knee Pad
Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel.
iXS Carve EVO Knee Guard
Consider yourself one of the lucky ones if you’ve felt the thrill of soaring down the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Knee Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep you cool and dry, even on hot summer days. And, it's antimicrobial so it doesn't absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking
Race Face Khyber Elbow Guard
Comfortable elbow pads that stay put throughout the ride. Hard shell performance, soft shell look and feel. - Women's specific fit - Perforated neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Soft mesh panel at inner elbow to keep cool - Integrated stabilization pad centers the elbow and ensures 'stay-put' fit - Woven upper elastic strap and lower neoprene comfort strap - Branded rubber grab tab
iXS Carve Evo+ Elbow Guard
The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized
POC Joint VPD Air Elbow
Sometimes you want coverage, but you don't full full-on DH pads. POC's Joint VPD Air Elbow pads are perfect for rowdy trails where you're pedaling most of the way. The pads use Visco-Elastic Polymer Dough that forms to your body and is flexible when moving, then turns rigid upon impact. They're breathable, stay where they're supposed to and are so light, you don't know they're there. Until you need them.
iXS Dagger Knee Guard
Freeride legend Darren “The Claw” Berrecloth demands the best when it comes to his equipment. iXS’s Dagger Knee Guards were developed with input from The Claw, so they have everything you need when you’re pushing the envelope. Specially designed for gravity applications, the Daggers are loaded with thoughtful, high-tech features for a perfect fit with next-level protection. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit, and iXS’s LoopLock closures provide compression with maximum security. Key Technologies: - Armadillo Duo: Dual-compound hard shells provide skid and puncture protection while remaining flexible - SqueezeBox: Patented shell linkage allows for full articulation without sacrificing protection - Knee Gusset: Internal padding around the patella locks protector in position and distributes impact forces around the knee - AeroMesh: Lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking
Race Face Charge Arm
Some days even your go-to trail doesn't want to play nice. Second-skin fit offers the ultimate in comfort and mobility on XC and lighter Trail rides while strategic Kevlar fabric mapping ensures minimal, yet targeted coverage against nicks and abrasions. Note: This guard is not rated for impact. It is recommended for minimal coverage against nicks and abrasions. - Butterfly mesh sleeve with second skin fit and targeted coverage - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures 'stay-put' fit - This pad is not rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only
Fox Racing Titan Race Liner Shorts
Go big with confidence. Fox's Titan Race Liner Shorts offer exceptional protection for the serious gravity and trail riders out there. • Multi paneled articulated main body construction • Anatomically shaped molded foam hip pads • 1 piece molded chamois for comfort
Fox Racing Launch Enduro Elbow Pads
• Lightweight, slip-on, soft elbow pad provides functional coverage. • Articulated, perforated neoprene chassis delivers an ergonomic and comfortable fit. • Elbow and forearm area padding with an abrasion resistant outer panel ensures proper coverage and durability.
iXS Carve EVO Knee Guard
Consider yourself one of the lucky ones if you’ve felt the thrill of soaring down the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Knee Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep you cool and dry, even on hot summer days. And, it's antimicrobial so it doesn't absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking
POC Joint VPD 2.0 DH Long Knee
POC's Joint VPD 2.0 DH Long Knee pads throw down full-on crash protection for riders pushing their limits and pushing the sport. They use Visco-Elastic Polymer Dough that forms to your legs and is flexible when moving, that then turns rigid upon impact. It's so tough, the 3D molded VPD 2.0 complies to motorcycle standards. Kevlar reinforced stretch fabric and dual straps keep them locked down where they belong. The plastic knee cap adds an extra layer of protection and reduces friction with the ground when crashing. The extra length helps in the event of the dreaded slipped pedal strike.
Leatt DBX 6.5 Carbon Neck Brace
- Carbon chassis design by Leatt with MaxiWeave carbon matrix for increased rigidity and lower weight - Helmet rim striking platform profile featuring improved helmet side clearance - On-board size adjusting including dial-in fit with sliding front and rear supports, folding thoracic, and 4-angle rear thoracic adjustment (0, 5 and 10 degree). No parts needed - Optional clear strap included for added security - Weight: 600g - CE certified as personal protective equipment 89/686/EEC
iXS Trigger Knee Guard
The Trigger models manage without hard shells and are therefore light and with its asymmetrical design extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Trigger we introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Asymmetrical Design, Left And Right Specifically And Individually Formed For Improved Comfort. - Anatomically Formed For Improved Comfort, Flexibility And Function - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified
Fox Racing Titan Sport Jacket
Go big with confidence when you're rocking Fox's Titan Sport Jacket. It offers exceptional back, chest, shoulder and forearm protection for the serious gravity riders out there. The Titan features high-density foam and high-impact plastic for maximum safety and the removable spine protector boasts a built-in kidney belt, too. Plus, the entire jacket has perfectly placed mesh ventilation zones for comfort and breathability.
Race Face Ambush Elbow Guards
- Featuring D30 high performance shock absorbing foam - Perforated Neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Soft mesh panel at inner elbow to keep cool - Woven upper elastic strap for personalized fit and lower Neoprene comfort band - Branded rubber grab tabs
Race Face Charge Leg
Some days even your go-to trail doesn't want to play nice. Second-skin fit offers the ultimate in comfort and mobility on XC and lighter Trail rides while strategic Kevlar fabric mapping ensures minimal, yet targeted coverage against nicks and abrasions. - Butterfly mesh sleeve with second skin fit and targeted coverage - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures 'stay-put' fit - Silicone patch at shin eliminates slippage - This pad is not rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only
Leatt 3DF Airfit Lite Body Vest
- Light and slim Level 1 multi-layer back, chest, elbow, and shoulder soft protection - Extra chest impact protection layer on upper chest for non-neck brace users - Maximum ventilated 3DF AirFit impact foam and MoistureCool wicking fabric - 3D designed for perfect fit, elastic waist belt for fine adjustment - Easy to wear zip-up compression sock design for maximum evaporation - BraceOn flexible neck brace connection - Removable foam for easy washing - CE certified for impact protection: CE EN1621-2 level 1 back, CE EN1621-3 level 1 impact front
POC Hip VPD 2.0 Shorts
POC's Hip VPD 2.0 Shorts protect your tailbone and hips with Visco-Elastic Polymer Dough that is flexible when moving, then turns rigid upon impact. Wear these liners under your DH shorts and you get muscle support, a chamois and peace of mind. They fit well thanks to stretchy fabric and breathe well due to the ventilated mesh.
Race Face Charge Arm Guard
Some days even your go-to trail doesn't want to play nice. Second-skin fit offers the ultimate in comfort and mobility on XC and lighter Trail rides while strategic Kevlar fabric mapping ensures minimal, yet targeted coverage against nicks and abrasions. Note: This guard is not rated for impact. It is recommended for minimal coverage against nicks and abrasions. - Butterfly mesh sleeve with second skin fit and targeted coverage - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures 'stay-put' fit - This pad is not rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only
Fox Racing Launch Pro D3O Elbow Guards
The Launch Pro D3O Elbow Guards build on the legendary performance of Fox's existing guards and elevate the performance to new heights. Designed with input from Fox's elite level race team, these elbow guards utilize D30 - the worldwide leader in impact reducing materials - and combine that technology with a removable hard cap for bulletproof durability and all mountain performance. The D3O CE certified build allows the elbow guard to stay flexible for ease of movement and comfort, but upon impact, they instantly harden to provide a hard shell-like protection. The Launch Pro D3O Elbow Guards have a breathable, moisture wicking construction, so they remain comfortable all day long. - Enhanced breathability through perforated, non-toxic, hypoallergenic Ariaprene neoprene - Anatomically designed panels provide superior on-bike comfort - Moisture wicking back fabric keeps you cool and dry - Removable/replaceable hardshell front cap to reduce snagging - D3O CE certified insert for impact protection
Page 1 of 2 Next page